検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 3 件中 1件目~3件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Two-step-pressurization method in pulsed electric current sintering of MoO$$_{3}$$ for production of $$^{99m}$$Tc radioactive isotope

末松 久幸*; 佐藤 壮真*; 中山 忠親*; 鈴木 達也*; 新原 晧一*; 南口 誠*; 土谷 邦彦

Journal of Asian Ceramic Societies (Internet), 8(4), p.1154 - 1161, 2020/12

 被引用回数:3 パーセンタイル:17(Materials Science, Ceramics)

$$^{99}$$Moと$$^{rm 99m}$$Tc核医学の製造として、照射ターゲットを製造するために三酸化モリブデン(MoO$$_{3}$$)ペレットが、一段および二段の加圧法によりパルス電流焼結で行われた。二段加圧法による550$$^{circ}$$Cでの相対密度は93.1%、一段加圧法による相対密度は76.9%であった。試料の温度は、パンチに熱電対を挿入することで直接測定した。二段加圧法により、ほぼ同じ金型でも試料温度は一段加圧法よりも高くなった。これは、電圧波形と電流波形から、2段階加圧法により試料の導電率が増加し、試料温度と相対密度が上昇すると考えられた。二段加圧法により、リサイクルされた粗粒$$^{98}$$Mo濃縮MoO$$_{3}$$粉末から低温でも高密度ターゲットを製作できる見通しを得た。

論文

Swelling of radiation-cured polymer precursor powder for silicon carbide by pyrolysis

武山 昭憲; 出崎 亮; 杉本 雅樹; 吉川 正人

Journal of Asian Ceramic Societies (Internet), 3(4), p.402 - 406, 2015/12

Ceramic yield, density, volume change and pore size distribution were measured for radiation- and thermally cured (poly carbo silan) PCS powder when they were pyrolyzed in the temperature ranges between 673 and 973 K. Higher ceramic yield was obtained for radiation-cured powder due to smaller amount of evolved gas. Temperature dependence of volume change and the total pore volume show the formation and disappearance of pores in the powders were determined by the volume shrinkage and evolution of decomposed gases. Volume shrinkage narrowed the pore size distribution for radiation-cured powder. For thermally cured powder, the narrowing of size distribution was disturbed by aggregated pores. Smaller amount of evolved gas from radiation-cured powder relative to thermally cured powder prevented the aggregation of pores and provided the narrow size distribution.

論文

Variation in the surface morphology of polycrystalline UO$$_{2}$$ powder induced by helium precipitation

芹澤 弘幸; 松永 純治*; 白数 訓子; 中島 邦久; 樫部 信司*; 加治 芳行

Journal of Asian Ceramic Societies (Internet), 1(3), p.289 - 295, 2013/09

焼結過程で粉末中に溶解したヘリウムが拡散して粒界にガスバブルを形成すると、焼結が抑制されて密度が上がらないために問題である。本研究では、HIPを用いてUO$$_{2}$$多結晶粉末にヘリウムを溶解させ、その後高温で加熱してヘリウムを放出させた試料の表面状態をBET及びFE-SEMによって観察した。ヘリウム放出後の試料の表面には、ふちが六角形をした浅いくぼみが多数見られた。これは、ヘリウムにより形成されたブリスタが破裂したために形成されたものと考えられる。この結果は、ヘリウムの析出に伴い、粒界領域にネガティブクリスタルが形成された可能性を示唆している。

3 件中 1件目~3件目を表示
  • 1